Blog

How to stick the glass matte film without bubbles?

How to stick the glass matte film without bubbles?

Glass film can be attached to the glass in bathrooms, bedrooms, balconies and other spaces. In bathrooms, most people stick it on the glass of the shower room to increase the safety and concealment of the glass. So how should glass film be attached?

First, measure the size of the glass. Cut out the size of the glass film according to the size, so as not to waste the glass film when directly pasting. If you want the glass film to be proportional to the effect, then you must spray the film position with water in advance to reduce the dust on the glass, so that the film is carried out in a dust-free environment.

Second, glass cleaning. Put a large towel with better water absorption under the glass that needs to be cleaned to avoid water flowing to other places, causing damage or dirt. Glass cleaning is a very heavy step, because whether the glass is clean or not will directly affect the quality and appearance of the film.

Third, stick the glass film. When applying the film, be careful that static electricity will cause adhesions to the film, so sprinkle the front and rear of the glass film with water, and then uncover the plastic film on the glass film. It is just a cut film. After spraying a little water, paste it directly on the glass. Here is a reminder that it is best to apply the film from top to bottom, so that the water can be squeezed out, and if there is any excess edge, it needs to be cut off.

Fourth, check the quality of the paste. After pasting the glass film, carefully check whether the corners of the film are firm and whether there are any bubbles and folds. After checking that there are no problems, the film is considered complete.

It is very simple to apply a glass film, but the steps are incorrect, and various problems will be encountered during the film application, which will affect the final aesthetics.

We all know that the glass in a shower room is susceptible to high temperatures and high pressures, which can cause the glass to be pressurized and heated unevenly, causing it to burst. Therefore, when taking a shower, the water temperature should be gradually raised, and hot water should not be used suddenly. This will increase the likelihood of glass bursting.